flashing Samsung Corby 2 S3850 via Flashtools

Ingredients: 
 - Data Cable S3850 
 - Flash Tools MultiLoader V5.65 
 - Firmware Samsung S3850 
 - Driver Samsung KIES
"How To Flash Samsung S3850 - How To Flash Samsung S3850 via Flash tool"
Flashing way:
1. Install Driver or "Samsung KIES"
2. In the condition die insert the battery then press / hold button "Volume Down + Call + Power" to enter "Download Mode"
See the picture below ..

 3. Connect your phone to the computer with a data cable4. If your phone is already ready status in the computer, then disconnect the computer and unplug HP battery5. Run "MultiLoader V5.65.exe"6. Select "BRCM2133"7. checklist "Boot Change", "Full Download"8. Enter a file: Folder "BOOT" to Boot
           apps_compressed.bin to Apps
           Rsrc_S3850_Open_SEASIA_Common_OLB.rc1 to Rsrc1
           Rsrc2_S3850 (Low) .rc2 to Rsrc2
           FactoryFs_S3850_Open_SEASIA_Common_OLB.ffs to Factory FS
           CSC_S3850_Open_SEASIA_Common_OLB.csc to CSC
           ShpApp.app to SHP APP9. In the condition die insert the battery then press / hold button "Volume Down + Call + Power" to enter "Download Mode"10. Connect your phone to the computer with a data cable11. Click the "Port Search" to get a better connection12. Click the "Download" flashing process will run ....13. Wait until the flashing process is complete .... and then unplug the battery and replace the battery and then turn on your cell phone14. For a full reset press: * 2767 * 3855 #15. Enjoy ....